MB SD C4 have update to 2015.12 version

2015.12 MB SD Connect Compact C4 Software HDD with DELL D630 /External

Support Win XP, and Win 7

Software Preinstalled MB SD Connect Compact 4 Star Diagnosis 2015.12V Plus Dell D630 Laptop Software Installed Ready to Use

V2015.12 MB SD C4 Software FUNCTIONS
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2. All electric system Diagnostic;(Do not include flash code)
3. Reading trouble code
4. Erasing trouble code
5. Live-data
6. Adaptation
7. Component testing
8. Maintenance
9. Information consultation
10. Component location diagram
11. Wiring diagram
V2015.12 MB SD C4 Software Testable System:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Which one is the best? Digiprog 3 or digimaster 3 mileage corrector?

Some customer whom want buy good mileage corrector, they asked me, which is the best one, digiprog3 and digimaster 3, what is the big different?

now, I will list some feedback from some regular customer.

Digimaster 3 feedback:
1) I started with digimaster 3 about three years back, could not do many cars it claims to do. so customers go to someone else and never come back. it does however have other functions like key programming of some cars and immo/airbag clear.
2) I Think Digimaster Is Better At Chip Programming it can even make some mb keys (sometimes damage eis flash).

Digiprog 3 feedback:

Digiprog is good tool for mileage programming. I use it almost every day and it causes me absolutely nothing wrong.

digimaster3 vs Digiprog 3:
1) I think digimaster is not worth the money (only if you do BMW). can’t do many more cars then digiprog, and often need to desolder.
digiprog can do a lot of cars. even mercedes 2010 by obd.
Best is to buy Yanhua digiprog if you can find them (its better quality).
The cheap digiprog from alipress often stop working. sometimes right out of the box, sometimes after 2 years.
If you’re thinking about spending 1500 euro then I’d suggest x-tool!
xtool can do more cars with obd (also renault kia hyundai volvo) and it can change mileage in ecu for fiat alfa lancia opel vw. also airbag crash reset and immo off and radio code read.
but xtool cant do w204 w212 w221 w207..
If want to start and not spend very much money you should buy digiprog, if you want more you can buy xtool later.

2) I have both digimaster latest one yanhua as well as digiprog latest version. 50% of the cars that digiprog do the digimaster does not especially VW, Audi, Benz.

Digiprog 3 V4.94 Feedback on car list:
1. Digiprog 4.94 tested ok results:
1) For VW, Audi, Skoda vehicles:
VW Tiguan 2007 —> OBD OK
VW Passat 2007 —> OBD OK
Seat MII 2013 —> OBD Work
passat 2011 work obd 5 min
passat 2012 work obd
passat cc 2012 work obd
jetta 2012 work obd
Skoda Superb (3t) II 2009y only by obd less then 5min
A6, 2009 work OBD, 4-5 minute.
golf mk5..ok
Volkswagen Eos obd2 ——ok
Skoda Roomster 2009 —> Diag work Perfect
vw eos 2007 —> Diag obd2 work
Skoda octavia 2009 1.9tdi instrument ok, ecu ok, dsg reset ok
SKODA Fabia 2009 obd ok. fabia -diag-read ?-write ok. (digi4.94)
Golf 6 2012 obd ok
Passat 2011 menu dash diag -2012 read ok/write ok /3 minute.
audi a4 2010 obd ok, audi a3 2010 obd ok
no problem with audi a3 for now 2011 and 2010 doing ok by obd
passat 2006 dash work
golf 2007: dash and dsg ok
300 m 2009 ok
jetta 2014: ok test Many Time always ok
tiguan 2009: ok test Many Time always ok
wrangler 2012 ok
Golf 4 MM Just open dash en look voor 24C** it takes 2 minutes
passat 2011 work by OBD
Vw Jetta 2013 take golf 6 on car list. Work fine 2 minutes
skoda superb 2011 nec+24c64 obd works fine.

Conclusion:

Digiprog3 is useful, but digimaster3 software can update online, it can cover many newer cars, which is the best, depends on what you need, newer cars mileage change, you can choose digimaster3.

How to use AUTEL MaxiSYS Pro MS908P Increase Benz Speed Limit

Device requirement: AUTEL MaxiSYS Pro MS908P

Car: Mercedes Benz C240

Original speed: 130 km/h

Now we need to change the speed limit from 130 km/h to 250 km/h

Steps:
Connect MS908P and J2534 with Benz C240.
Go to “MaxiSys-> Diagnostics-> Benz-> vehicle detect”.

Gateway data initializing…
Get the VIN number. Tap OK to go on.

Select the date of manufacture vehicle. This case is up to 2003.
Press the button left to select left-hand steering.
System data initializing…
Communication is established…
Go to Programming/Coding.

Go to ME2-SFI-Motor electronics 2.

Establishing communication…
Go to Variant coding.
Go to Display of coding data.
Go to Coding.
System data initializing…
Scroll to 2031 about speed limit. Put on the bar.

Tap F2 Edit.
Set 250 km/h, and tap OK.

 

Tap F3 send.
Tap OK to make sure that the coding is transferred to the control unit.
The coding has been carried out.

Turn off the key and then turn the car back on. Then you can go for a drive.

Ps. cool thing!!
Go to instrument cluster.

Establishing communication…
Go to Active Test.
Go to Actuation of the instrument pointer up to the maximum position. And you will see

 

MB SD C4, MB Star C3, C4, We Have Update To The Newest Version In 2015.12 For X’mas

2015.12 Mercedes Star Diagnosis For Mb Star C3, C4 Pro

2015.12 Mercedes Star Diagnosis For Mb Star C3 Pro

V2015.12 MB STAR C3 Software Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2. All electric system Diagnostic;(Do not include flash code)
3. Reading trouble code
4. Erasing trouble code
5. Live-data
6. Adaptation
7. Component testing
8. Maintenance
9. Information consultation
10. Component location diagram
11. Wiring diagram
Testable System:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

MB SD Connect Compact 4 Star Diagnosis 2015.12V Plus Dell D630 Laptop

Software Preinstalled MB SD Connect Compact 4 Star Diagnosis 2015.12V Plus Dell D630 Laptop Software Installed Ready to Use

TOP 3 Reasons to buy V2015.12 MB SD C4 HDD:
1. Two format HDD for choose: D630 HDD only fit D630 laptop but running speed faster, is internal HDD. External HDD support any laptop with USB 2.0.
2. Has two WINDOWS system available for choose: WINDOWS 7 and WINDOWS XP
3. Latest version: V2015.12

Xhorse VVDI2 MB BAG Tool Will Release Soon On EOBD2.NET

Xhorse VVDI2 MB BGA Tool support bga password calculation function and only need 4 min to find password.

Xhorse VVDI MB BGA Tool functions:

VVD MB BGA TOOL Function introduction

1.support BE key,read password and prepare new key via IR.
2.NEC V051,V057 support on board get paaword
3.All NEC keys support on board write and erase
4.password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.
5.support renew EIS and ELV
6.support write EIS and ELV
7.support online generate key file
8.unlock ELV function will be released soon.
9.Renew other control modules function will support soon

Technical details as far as I know:

Model support IR/OBD:

W164, W164 2009+

A166, W197,W212, W218, A246

A169, W209, W211

W172, W204, A207

W203

W204, W207, W212 only by dump

W209 only by dump

W210

W215, W220

W230

W216

W221

W906

Keys version supported:

v03, v06, v08

v05, v07, v09

v59,v61

Two adapters, one for versions 28, 35, 40, 51, 57.  Another one for version 59.

 

Adapters

Creator C310 BMW Multi System Scanner Have Update To V5.1

Creator C310 BMW Multi System Scanner Have Update To V5.1, and this is the main function for the new version.

Free download Creator C310:
http://www.mediafire.com/download/j3l2niqml9g859g/BMW-C310-update-for-V5.1.rar
Support Multi-Language:
—  English
—  Traditional Chinese
—  German

Creator C310 BMW Multi System Scan Tool V4.8
C310 BMW Multi-system scanner supported vehicles:
Supports BMW between 1997 to 2013
1 Series: 1’_E81/E81/E87/E88,1’_F20
3 Series: 3’/Z3_E36,3’_E46,3’_E90/E91/E92/E93, 3’_F30
5 Series: 5’_E39,5’_E60/E61,5’_GT(F07), 5’_F10/F11/F18
6 Series: 6’_E63/E64,6’_F12/F13
7 Series: 7’_E38,7’_E65/E66,7’_F01/F02/F03/F04
X Series: X3_E83,X5_E53,X5_70,X6_E71,X1_84,X3_F25
z Series: 3’/Z3_E36,Z4_E85/E86,Z4_E89
MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60
Include : Drive , Chassis and Body all system
Creator C310 5.1 functions:
read trouble codes, clear trouble codes, displays live data stream and graph display and vehicle version information. Clear adaptation, Engine oil reset

How to update BMW Creator C310 V5.1:
Step 1: Insert the software CD in the package into the computer. Open the CD software and discover the update Creator C310 V4.5 bin file and exe configuration. Open “Setup exe-V5.1″driver.
Step 2: Click the “Finish” button after installing the driver configuration.
Step 3: Return to the main menu. Connect the Creator C310 scanner to the computer via USB.
Step 4: Select “Update” on the list of functions.
Step 5: Find the file in the previous folder “OBD-CREATOR V5.1-ES-BIN”.
Step 6: The system automatically performs an upgrade. Please wait patiently until the process is complete.

Step 7: Exit the upgrade interface and ready to use the scanner.

Warming: You should make your laptop full power during the update process.

How to use Super MB STAR C3 Dev Mode clean ASSYST Plus Memory

Tools selected:

Super MB STAR C3

(with lots of tests using dev mode, it is turned out that original super mb star will be better than SD connect c4, of course, just in terms of dev mode.)

How to clean ASSYST Plus Memory:

In Developer mode : (tested version 11-2010)
Steuergerate (Control units) ->F3
Aufbau (Body) ->F3
ZGW (CGW) ->F3
Entwicklungen (Development data) ->F3
Steuergerate – Anpassungen (Control unit adaption) ->F3
Programmieren (Update) von Steuergeraten (Control module programming) ->F3
Steuergerat programmieren (Auswahl) (Program control unit (Selection)) ->F3

Now we have 2 options to flash the ZGW/CGW with, choose the correct one
Don’t panic ! if you choose the wrong file , it terminates process and you can do it over again
Confirm Flash pop-up with Ja (Yes)
After that it says : “Das Steuergerate wurde erfolgreich programmiert”
-> “OK” it ask for a reset -> JA (Yes) ->
ECU Reset (FN_ECU_Reset) ->F3 again ->F3

Now you Complete full History wipe

Xtool X100 PRO Update Online Without Registration Now

This week, many old customers, they have ordered X100 key programmer in 2014, and want update now, but cannot finish the update, because the old dealer code is not working now, and register process, also have error.

now, I want tell you that, X100 key programmer, no need register when update software online.

this is the process.

1. Download Update Tool from Official Website.

2. Select the software language you need English/Chinese

3. Enter your Username/SN (Serial Number) to login

Login to activate your account and start download software

NOTE:

S/N and password can be found on the device “About” item option.

Power on Xtool X100 key programmer, check S/N and password under “About” item.

The old Version X100+ can still be updated online too.

EOBD2.NET New Arrival Original Xhorse VVDI Benz VVDI MB TOOL

Xhorse VVDI Benz VVDI MB TOOL BAG

This one need customized from Xhorse company. Need 5-10 days preparing goods. new arrival in this Saturday, will update new function in the future.

This one need customized from Xhorse company. Need 5-10 days preparing goods.

Attention:
If you have bought Condor key cutting machine (Item number SL252 IKEYCUTTER CONDOR XC-007 Master  or SL273 Original iKeycutter CONDOR XC-MINI Master ).
Then price for you is 1200USD. Password is free to get once a day. For second time, price is 35USD. It needs 4 minutes for collection, and 2 minutes for calculation.

Function:

Benz Key programming
BAG calculating
Password calculating
and so on

Original Xhorse VVDI Benz VVDI MB TOOL Key Programmer Including BAG Calculation