Use OBD2 Odometer Corrector For Mileage Change

OBD2 Odometer Correct And Immobiliser Key Programming Tool For Ford

This is the process for how to use this tool,

Instrument calibration work is friendly without removing instrument.
It can read and write into EEPROM file, it can read out immo code, and directly edit key position byte, then replace the original key to a new key, also it can read out and
write into the synchronized bytes of instrument and engine, then directly synchronize without programming.

Car model: Ford mondeo Zetec  57 plate 2007

mileage-correct-tool-1 mileage-correct-tool-2 mileage-correct-tool-3 mileage-correct-tool-4

GM Tech2 Scanner Use TIS2000 USB Key Can Support Reprogram

GM Tech2 diagnostic tool can support 12V car before 2007, but and ECU programming,

But if you need use it for reprogram, you need buy the TIS2000 USB Key,

and in the GM tech2 scanner on pobd2.com, package also have this TIS2000, no need buy more. and software car for these car list.

GM
GM-English         32.008 1991-2014
GM-Germany      32.008 1991-2013
GM-Spanish       32.008  1991-2013
GM-Japanese   32.008   1991-2013
GM-French   32.008   1991-2013
GM-Thai   32.008   1991-2013
GM-Portuguese  32.008   1991-2013
GM-Korean   32.008    1991-2013

SAAB
SAAB-English     148.000

OPEL
OPEL-English     V165      1997-2014
OPEL-Italian       133.001 1997-2012
OPEL-Germany  85.001 1997-2008
OPEL-Spanish   91.001 1997-2009

Holden
HOLDEN-English  V149 1999-2013

SUZUKI
SUZUKI-English   01.210.020

ISUZU
ISUZU-English   CAN-BUS 107.021  2010-  (CAN-BUS support car models after 2010)
ISUZU-English   K-Line  11.62   1996-2013 (K-line support car models from 1996 to 2011)

(If you want ISUZU software, please tell us you want CAN-BUS or K-line)

XTOOL X-100 PAD 2 Support Odometer Adjustment And EPB Fucntion

X-100 PAD 2 is a tablet with the latest technologies to perform key programming,mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset and so on.

X-100 PAD 2 Features:
Key Programming
Oil Reset/Engine oil light reset
Odometer Adjustment
Tire Pressure Warning Light Reset
Timing belt light reset (Manual Operation)
EPB Electrical Parking Brake Adaptation
TPS Throttle Body Adaptation
Steering Angle Calibration
Battery Reset
DPF PIN Code Reading 
Hexadcimal editor(Win Hex)
OBDII Diagnosis
Support the latest vehicles with CAN BUS and UDS protocol
Update Via WIFI (always equip your device with the latest software)
Car List:
America:
Buick, Cadillac, Chevrolet, Dodge, GM, GMC, Hummer, Pontiac, Saturn, Ford
Asia:
Acura, Honda, Hyundai, Infiniti, Isuzu, KIA, Lexus, Mazda, Mitsubishi,
Nissan, Ssangyong, Subaru, Suzuki, Toyota
China:
BYD, Great Wall Motor, Brilliance, JAC, Geely Cars, Lifan Cars, Chery
Europe:
Audi, Benz, Citroen, Ford, Fiat, Jaguar, Lancia, Land Rover, Opel, Peugeot,
Porsche, Renault, Romeo, Seat, Skoda, Smart, VW
XTOOL X-100 PAD 2 Special Functions Expert Support Odometer Adjustment And EPB Fucntion
Oil Reset Functions Features:
Innovative one-click oil reset for VW, Audi, BMW, Mercedes Seat, Skoda, Volvo, etc.
Support engine oil, spark plugs, front brake pads, back brake pads, air conditioner, brake liquid,
coolant liquid, vehicle checking , etc. resetting for BMW. And the supported BMW models are F01/F02/F03/F04/F07/F10/F11/F12/F13/F18/F20/F30, etc.
Support Mercedes Benz new C Class, E Class models and Mercedes Benz VITO/VIANO/SPINTER.
Support the lifespan percentage resetting of engine oil for Buick, Cadillac etc.
Support Porsche Cayenne, Panamera till 2012
Support maintenance light reset for Volvo, Land Rover.
EEPROM Adapter Features: 
1.PIN Code Reading
2.ECU Initializing
3.Chip Programming

Xhorse VVDI PROG Programmer have update to the newest version V4.5.2

Xhorse VVDI PROG Programmer have update to the newest version V4.5.2

VVDI PROG(Version4.5.2)

Software Free download online
password:123456

 v4.5.2              (2016-11-25)
* This version DON’t need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1
version in Doc folder
+ Add AB28F200B5T(PSOP44),
AB28F200B5B(PSOP44),
AB28F400B5T(PSOP44),
AB28F400B5B(PSOP44),
AB28F800B5T(PSOP44),
AB28F800B5B(PSOP44)options
in <1-EEPROM&FLASH>->
(Need the TB28FXXX adapter)
+ Add HC908GR4,
HC908GR8,
HC908LJ12,
HC908LJ24,
HC908GR4_SECURED,
HC908GR8_SECURED,
HC908LJ12_SECURED,
HC908LJ24_SECURED options
in <2-MCU>->
<motorola-mc69hc(9)08>
+ Add MC9S08JM8_UNSECURED,
MC9S08JM16_UNSECURED,
MC9S08JM32_UNSECURED,
MC9S08JM60_UNSECURED options
in <2-MCU>->
+ Add [V850ES/FE3]series:
D70F3623 option
[V850ES/FF3]series:
D70F3626 option
[V850ES/FG3]series:
D70F3627,
D70F3629,
D70F3630 options
[V850ES/FJ3]series:
D70F3631,
D70F3632,
D70F3633,
D70F3634,
D70F3635 options
[V850ES/FK3]series:
D70F3636,
D70F3637,
D70F3638 options
in <2-MCU>->

+ Add BCM3 option
in <4-IMMOBILIZER>->
+ Add XIAOKANG(2015) option
in <5-DASHBORAD>->
+ Add SAICMAXUS-RV(2015) option
in <5-DASHBORAD>->
+ Add <7-ARIBAG> option in TYPE
+ Add GL8-SRS(2015) option
in <7-ARIBAG>->
+ Add MAKKA-SRS(2015) option
in <7-ARIBAG>->
+ Add VW52-SRS-V2 option
in <7-ARIBAG>->

WIFI Set Process For Volvo 88890300 Vocom Interface

Volvo 88890300 Vocom Interface Support WIFI Connection For Volvo/Renault/UD/Mack Truck Diagnose

1. Volvo 88890300 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins.
2. With Volvo 88890300 Vocom Interface you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine.
3. Volvo 88890300 Vocom Interface provide functions for updating the tool, communication with the product, and other external applications.
The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.
4. This device support WIFI connection.

How to set the 88890300 Vocom WIFI:

1, Use USB cable ,  go to ptt , setting, Communication unit configuration , configure, ‘USB+Directly to Communication unit’
2, ‘Direct’ ->’Restore default values’-‘Apply’-‘Ok’
3, Click Ok again.  then disconnect usb cable,
4, Go to Setting->’Comm.unit Selection’ -. ‘ Communictcation unit 8889300 ….Nickname’
5, Now your can use signal get wireless singal.
https://www.youtube.com/watch?v=SO0oGhwHNYc&feature=youtu.be
All ok
Volvo 88890300 Vocom Interface Support WIFI Connection For Volvo/Renault/UD/Mack Truck Diagnose

CN900 Mini Transponder Key Programmer Can Support Toyota G Chip

Note:
If you want use CN900 key programmer for toyota G chip copy, need tokens, Cn900 have 12 tokens when you get it, once you used up, we can help you add other 12 tokens free,
but more tokens add, need pay related fee.

But when you use mini CN900 for other key chip, no need tokens.

CN900 Mini Highlights:
It can support 4D, 4C, 46, G chip, and can support WIFI. No need related 4D, 4C box.
It can support CN5 chip to copy toyota G and 4D chip
RFID identifly 125KHZ  134.2KHZ  13MHZ
RF data reception 27-900MHZ
RF radio frequency identification,support all kinds of remote controls
RF Data transmission, supports all kinds of remote control simulation test
Various types of vehicle anti-the fault detection, matching detection
Portable Super long standby
Support four kinds of frequency 850/900/1800/1900MHZ
GSM/GPRS SIM
USB2.0
Bluetooth4.0
As for the products improvements, specifications are subject to change
Official website: www.cn900.net
CN900 MINI Main Features
Function 1:
1) Read out the chip code for 11 12 13 33 T5  40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota “G ” chip key  (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.
Function 2:
It can identify Toyota smart key, and read out the data.
Function 3:
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using “FREE ” dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of  special chip)

Function 4:
Connecting with Chinese PC software, it can save the read key code data unlimited.(PC Software have not release,will be release in the future)
Function 5:
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.
Function 6:
Without removing the ECU (Benz W140), it can start the chip.
Function 7:
It can unlock the 48 chips except the crypto lock 48 chips.
Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.
Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.
Function 10:
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74
Function 11:
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.
Function 12:
Can copy all ID46 chip:
BMW 46 chip,ACURA 46 chips,Honda CRV  FIT(NEW)  Accord(2008) Civic 46 chips;Mazda haima 46 chips;Mitsubishi 46 chips;Buick GMC CRUZE 46  chip.
New Chery tiggo A3 46  chips; Nissan TIIDA TENNA LIVINA Sylphy  Nissan QASHQAI Q35 46 chip. Brilliance 46 chip.Peugeot/Citroen 307  206 -46 chips;Triumph
Senna 406 (2001year);Picasso 46 chip.Suzuki swifts  SX4  46 chip.Land Rover FREELANDER 46 chip. Geely dedicated 46 chip.
Function 13:
can copy 4D chip
Function 14:
Support 72G Chip copy.

Xhourse VVDI2 Commander Update To V1.2.3

Xhourse VVDI2 Commander Key Programmer Have  Update To V1.2.3

You can update with this link

https://mega.nz/#!39xUCSQa!Xfw9OWF2T4PgyUjC1G5RQ1XlADTxGQOZWucQ-lNEGHQ
 Highlight for VVDI2 V1.2.3(2016-11-16)

===== Support software version ====
VAG V1.2.3
BMW V1.2.3
Porsche V1.2.3
PSA V2.0.5
Passthru J2534 V1.2.3
Online Update Tool V1.2.2
Quick Start V1.2.3
You can find the detail update information from Readme in newest software, Mainly include:
1. Fix bug for lost all key via OBDII: support keyless Go cars
2. Prepare remote: Add support for Chevrolet Epica
3. Update remote database

Update Steps:
1. Close other VVDI2 software, Connect VVDI2 to PC with USB cable
2. Choose VVDI2 firmware version
3. Press button “Update Online” to start
—————————ATTENTION!!!—————————
If failed, close antivirus and firewall software, try again
DON’t shutdown your PC or disconnect USB cable while updating!!!

 

VXDIAG Diagnostic Tool On Sale

Good New!

VXDIAG Diagnostic Tool All  In Promotion now

VXDIAG VCX NANO For Land Rover And Jaguar Software V145, only 89USD

VXDIAG VCX NANO For Land Rover And Jaguar Software V145

WIFI Version VXDIAG VCX NANO For Ford/Mazda 2 In 1 With IDS V97

Only 99USD

WIFI Version VXDIAG VCX NANO For Ford/Mazda 2 In 1 With IDS V97

VXDIAG MULTI Diagnostic Tool 4 In 1 For TOTOYA V10.10.018/ Ford And Mazda V95.03/ JLR V141

Only 239USD

VXDIAG MULTI Diagnostic Tool 4 In 1 For TOTOYA V10.10.018/ Ford And Mazda V95.03/ JLR V141

VXDIAG VCX NANO for GM/OPEL GDS2 Diagnostic Tool Only For Win7 64bit and Win8 64bit system

Only 109USD

VXDIAG VCX NANO for GM/OPEL GDS2 Diagnostic Tool Only For Win7 64bit and Win8 64bit system

VXDIAG VCX NANO For TOYOTA

Only 62USD

VXDIAG VCX NANO For TOYOTA

If you want more, please enter www.pobd2.com