How to set EL-50448 Tire Pressure Monitor Sensor TPMS Activation Tool OEC-T5

How to set EL-50448 Tire Pressure Monitor Sensor TPMS Activation Tool OEC-T5

Step 1 – Enter leaning mode
Set the gearshift lever to “P”
Put the ignition switch to “ON”
Enter the interface of tire pressure display by DIC
DIC shows “Press Set / Ctrl to re-learn”
Press “Set / Ctrl”
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode

Step 2 – Read tire pressure sensor information
Start from the front-left wheel,
Make the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position & close to the rim of the tire sidewall
El-50448 tire pressure tool starts by the start switch
Successful to read the tire pressure sensor information when the horn bleeps once

Step 3 – Same method to read other tire pressure information
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels.
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.