Tag Archives: Original Scanner

New Arrivals: (Free shipping) Launch DIY Scanner CReader 9081 CR9081 Full OBD2 Scanner+ABS+SRS+Oil+EPB+BMS+SAS+DPF

Launch CReader 8021 Introduction:

CReader 8021 is a small-size multipurpose CReader. It provides ten OBDII/EOBD diagnostic modes and also the following functions: oil reset, set service mileage,
EPB reset. In addition, it supports ABS and SRS diagnosis to facilitate all-around car detection.

Launch CReader 8021 Languages: English, French, German, Spanish, Italian, Russian, Portuguese, Dutch (NL), Chinese Simplified

1. OBD full functions
Read dynamic data streams and MIL
Read readiness status
Query freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs
2. Oil reset
3. Electrical Parking Brake(EPB) reset
4. Battery Management System(BMS) reset
5. Steering Angle Sensor(SAS) reset
6. Read DTCs, clear DTCs, and read data streams for the ABS system
7. Read DTCs, clear DTCs, and read data streams for the SRS system
8. Color and graphical display of data streams
9. Query DTCs
10. Free update via internet
11. Multilingual support
12. Print data via PC

Launch CReader 8021 Specifications:
Screen: 4.0″TFT 320*480 dpi
Voltage range:9-18V
Operating Temperature: 0~ 50
Environment Temperature: -20~70
Dimension: 195mm*86mm*32 mm (7.6″ *3.4″ *1.2″)
Weight: 460g (pending)

Launch CReader 8021 Car models Coverage:
For CURA, DAEWOO, HONDA, HOLDEN, HYUNDAI, INFINITI, ISUZE, KIA, LEXUS, MAHINDRA, MARUTI, MAZDA,
MITSUBISHI, NISSAN, SUBARU, SUZUKI, TOYOTA, TATA,CHRYSLER, FORD, GM, EU-FORD, AUS-FORD, ALFA-ROMEO,
AUDI, BENZ, BMW, CITROEN, DACIA, FIAT, JAGUAR, LANCIA, LANDROVER, MINI, OPEL, PEUGEOT, PROSCHE, RENAULT, SAAB,
SEAT, SKODA, SMART, SPROMTER, VAUXHALL, VOLVO, VW
Note: You can check the car coverage list on the package .

http://www.pobd2.com/wholesale/launch-diy-scanner-creader-9801cr9081-full-obd2-scanner.html

launch-diy-scanner-creader-9801cr9081-full-obd2-scanner-1 launch-cr9081-diy-scanner-4 launch-cr9081-diy-scanner-3 launch-cr9081-diy-scanner-7

New Product:Launch DIY Code Reader CReader 8011 Full OBD2 Scanner OBD+ABS+SRS+Oil+EPB+BMS For TOYOTA,FORD,BENZ

CReader 8011 Introduction:

CReader 8011 is a small-size multipurpose CReader. It provides ten OBDII/EOBD diagnostic modes and also the following functions: oil reset, set service mileage,
EPB reset. In addition, it supports ABS and SRS diagnosis to facilitate all-around car detection.

CReader 8011 Languages: English, French, German, Spanish, Italian, Russian, Portuguese, Dutch (NL), Chinese Simplified

CReader 8011 Functions:

1. OBD full functions
Read dynamic data streams and MIL
Read readiness status
Query freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs
2. EPB reset
3. Oil reset
4. Read DTCs, clear DTCs, and read data streams for the ABS system
5. Read DTCs, clear DTCs, and read data streams for the SRS system
6. Color and graphical display of data streams
7. Query DTCs
8. PC internet free update
9. Multilingual support
10. Print data via PC
11. Battery management system (BMS) reset

CReader 8011 Specifications:

Screen: 4.0″TFT 320*480 dpi
Voltage range:9-18V
Operating Temperature: 0~ 50
Environment Temperature: -20~70
Dimension: 195mm*86mm*32 mm (7.6″ *3.4″ *1.2″)
Weight: 460g (pending)

CReader 8011 Car models Coverage:
For CURA, DAEWOO, HONDA, HOLDEN, HYUNDAI, INFINITI, ISUZE, KIA, LEXUS, MAHINDRA, MARUTI, MAZDA, MITSUBISHI,
NISSAN, SUBARU, SUZUKI, TOYOTA, TATA,CHRYSLER, FORD, GM, EU-FORD, AUS-FORD, ALFA-ROMEO, AUDI, BENZ, BMW,
CITROEN, DACIA, FIAT, JAGUAR, LANCIA, LANDROVER, MINI, OPEL, PEUGEOT, PROSCHE, RENAULT, SAAB, SEAT, SKODA, SMART, SPROMTER, VAUXHALL, VOLVO, VW
Note: You can check the car coverage list on the package.

Package Includes:

1pc x Launch DIY Code Reader CReader 8011

http://www.pobd2.com/wholesale/launch-diy-code-reader-creader-8011-full-obd2-scanner.html

 

New Arrivals:Launch DIY Code Reader CReader 8001 Full OBD2 Scanner/Scan Tool with Oil Resets Service

Launch CReader 8001 can perform Oil reset and EPB reset. It can read DTCs, clear DTCs and read data streams for the ABS system and SRS system.

CReader 8001 Languages: English, French, German, Spanish, Italian, Russian, Portuguese, Dutch (NL), Chinese Simplified

CReader 8001 Feature:
Brand-new process design:
Color screen and light weight
Connector with unique protection design to prevent fracture
User-friendly shortcut keys to enhance the work efficiency
1. Support all 10 test modes of OBD II
2. Color graphical display of data streams
3. Built in DTC help information
4. PC upgrade via internet freely
5. Multilingual support
6. Record and playback Live Data
7. Print data via PC
8. Electrical Parking Brake(EPB) reset
9. Oil reset
10. Read DTCs, clear DTCs and read data streams for the ABS system
11. Read DTCs, clear DTCs and read data streams for the SRS system

CReader 8001 Specifications:
Screen: 4.0” TFT 320*480 dpi
Voltage range: 9-18V
Operating Temperature: 0℃~ 50℃
Environment Temperature: -20℃~70℃
Dimension: 195mm*86mm*32 mm (7.6 ” *3.4 ” *1.2 ”)
Weight: < 460g

CReader 8001 Package Includes:

1pc x Launch DIY Code Reader CReader 8001 Full OBD2 Scanner/Scan Tool

http://www.pobd2.com/wholesale/launch-diy-code-reader-creader-8001.html
launch-diy-code-reader-creader-8001-1
launch-diy-code-reader-creader-8001-3launch-diy-code-reader-creader-8001-4launch-diy-code-reader-creader-8001-5launch-diy-code-reader-creader-8001-6

Good News: Launch DIY Code Reader CReader 7001 Full OBD2 Scanner/Scan Tool with Oil Resets Service has Published

CReader 7001 provides full OBD/EOBD diagnostic functions and Oil reset, other provides following multiple functions to meet different requirements: EPB reset, BMS reset, SAS reset, DPF reset, etc.

CReader 7001 Languages: English, French, German, Spanish, Italian, Russian, Portuguese, Dutch (NL), Chinese Simplified

CReader 7001 Functions:

1. OBD full functions
Read dynamic data streams and MIL
Read readiness status
Query freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs
2. Color and graphical display of data streams
3. Query DTCs
4. Free update of USB interface internet
5. Multilingual support
6. Data record and replay
7. Oil reset
8. Print data via PC
​OBD Function + Oil Reset + EPB Reset + BMS Reset + DPF Reset + SAS Reset + ABS Bleeding Reset

Specifications:
Screen: 4.0″ TFT 320*480 dpi
Voltage range: 9-18V
Operating Temperature: 0~ 50
Environment Temperature: -20~70
Dimension: 195mm*86mm*32 mm (7.6″ *3.4″ *1.2″)
Weight: 460g

Package Includes:

1pc x Launch DIY Code Reader CReader 7001F Full OBD2 Scanner/Scan Tool with Oil Resets Service
http://www.pobd2.com/…/launch-diy-code-reader-creader-7001-…

No automatic alt text available.
launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-1 launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-2 launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-3 launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-4 launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-5 launch-diy-code-reader-creader-7001-full-obd2-scannerscan-tool-6

New Listing: Launch CReader 6011 OBD2/EOBD Diagnostic Scanner with ABS and SRS System Diagnostic Functions

Launch CReader 6011 is a multipurpose CReader with a large-size color display. It provides full OBDII/EOBD diagnostic functions, and also ABS and SRS system diagnostic functions. It is a practical car diagnostic tool that helps one resolve common faults in daily car maintenance.

Launch CReader 6011 Languages: English, French, German, Spanish, Italian, Russian, Portuguese, Dutch (NL), Chinese Simplified

CReader 6011 Functions:

1. OBD full functions
Read dynamic data streams and MIL
Read readiness status
Query freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs

2. Color and graphical display of data streams

3. Query DTCs

4. Free update of USB interface internet

5. Multilingual support

6. Data record and replay

7. Read DTCs, clear DTCs, and read data streams for the ABS system

8. Read DTCs, clear DTCs, and read data streams for the SRS system

9. Print data via PC
Main difference between CR6011 and C6001: CR611 provides the ABS and SRS diagnostic functions.

CReader 6011 Specifications:
Screen: 4.0″ TFT 320*480 dpi
Voltage range: 9-18V
Operating Temperature: 0~ 50
Environment Temperature: -20~70
Dimension: 195mm*86mm*32 mm (7.6″ *3.4 ” *1.2 “)
Weight: 460g

CReader 6011 Package Includes:

1pc x Launch CReader 6011 OBD2/EOBD Diagnostic Scanner

http://www.pobd2.com/wholesale/launch-creader-6011-obd2-eobd-diagnostic-scanner.html

New Product: Launch DIY Code Reader CReader 6001 Full OBDII OBD2 functions Support O2 Sensor Test

Launch CReader 6001 is a small-size color CReader with complete functions. It provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. It features a 2.8-inch color display, graphical data streams, USB interface internet update, as well as records and replays data.

CReader 6001 Functions:

1. OBD full functions
•Read dynamic data streams
•Read readiness status
•Turns off Malfunction Indicator Light (MIL)
•Query freeze frame data
•Read current DTCs
•Clear DTCs
•O2 sensor test
•On-board monitor test
•Read pending DTCs
•On-board system or component control
•Read vehicle information
•Read permanent DTCs
2. Color and graphical display of data streams
3. Query DTCs
4. Free update via internet
5. Multilingual support
6. Data record and replay
7. Print data via PC

The main difference between the CReader CR6001 and CReader CR5001: CR6001 provides the data record and replay function.

CReader 6001 Specifications:

Screen: 2.8″ TFT 320*240 dpi
Voltage range: 9-18V
Operating Temperature: 0℃~ 50℃(32℉-122℉)
Environment Temperature: -20℃~70℃(-4℉-158℉)
Dimension: 142mm*85mm*30 mm (5.6 ” *3.4″ *1.2″
Weight: <320g (0.7lb)

CReader 6001 Package Includes:

1pc x Launch DIY Code Reader CReader 6001launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test-1 launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test-2 launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test-3 launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test-4 (1) launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test-5

http://www.pobd2.com/wholesale/launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test.html

New Arrival: Launch CReader 5001 Code Reader Full OBDII/EOBD Diagnostic Functions Scan Tool

CReader 5001 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. It features a 2.8-inch color display, graphical data streams, and USB interface internet update, which facilitates car maintenance.

Launch CReader 5001 Languages:
English, French, Spanish, German, Italian, Russian, Polish, Portuguese, Turkish, Czech, Chinese Simplified, Chinese Traditional

Launch CReader 5001 Feature:
Brand-new process design:
Color screen and light weight
Connector with unique protection design to prevent fracture
User-friendly shortcut keys to enhance the work efficiency
1. Support all 10 test modes of OBD II
Read dynamic data streams and MIL
Read readiness status
Read freeze frame data
Read current DTCs
Clear DTCs
O2 sensor test
On-board monitor test
Read pending DTCs
On-board system or component control
Read vehicle information
Read permanent DTCs
2. Color graphical display of data streams
3. Built in DTC help information
4. Free PC upgrade via internet
5. Multilingual support

Launch CReader 5001 Specifications:
Screen: 2.8″ TFT 320*240 dpi
Voltage range: 9-18V
Operating Temperature: 0℃~ 50℃(32℉-122℉)
Environment Temperature: -20℃~70℃(-4℉-158℉)
Dimension: 142mm*85mm*30 mm (5.6 ” *3.4″ *1.2″)
Weight: <320g

Package Includes:

1pc x Launch CReader 5001 Code Reader
Go to TOP
launch-creader-5001-code-reader-diagnostic-functions-scan-tool-1launch-creader-5001-code-reader-diagnostic-functions-scan-tool-2 launch-creader-5001-code-reader-diagnostic-functions-scan-tool-3 launch-creader-5001-code-reader-diagnostic-functions-scan-tool-4 (1) launch-creader-5001-code-reader-diagnostic-functions-scan-tool-5

New Release: Launch DIY CReader 4001 OBDII/EOBD Auto Diagnostic Scan Tool Code Reader

Launch CReader 4001 is an entry-level personal car maintenance tool. It features a full color display, meets all OBDII/EOBD protocols, and provides commonly-used diagnostic functions. It is cost effective and helps to rectify daily maintenance fault codes.

1. OBD partial functions
•Read DTCs
•Clear DTCs
•Turns off Malfunction Indicator Light (MIL)
•Read dynamic data
streams
•Read readiness status
•Read freeze frame data
•Read pending DTCs
•Read permanent DTCs
•Read vehicle information
2. Color and graphical display of data streams
3. Query DTCs
4. Free update via internet
5. Multilingual support

Launch CReader 4001 Specifications:
Screen: 2.4” TFT 320*240 dpi
Voltage Range: 9-18V
Operating Temperature: 0℃~ 50℃(32℉-122℉)
Environment Temperature: -20℃~70℃(-4℉-158℉)
Dimension: 120mm*75mm*20 mm(4.7″ *3.0″ *0.8″)
Weight: <200g(0.44lb)

Launch CReader 4001 Package Includes:

1pc x Launch DIY CReader 4001 OBDII/EOBD Auto Diagnostic Scan Tool Code Reader

If you are interested in it, please don’t hesitate to contact us.

http://www.pobd2.com/wholesale/launch-diy-code-reader-creader-6001-full-obdii-obd2-functions-support-o2-sensor-test.html

launch-diy-creader-4001-obdiieobd-auto-diagnostic-scan-tool-code-reader-1 launch-diy-creader-4001-obdiieobd-auto-diagnostic-scan-tool-code-reader-2 launch-diy-creader-4001-obdiieobd-auto-diagnostic-scan-tool-code-reader-3 launch-diy-creader-4001-obdiieobd-auto-diagnostic-scan-tool-code-reader-5 launch-diy-creader-4001-obdiieobd-auto-diagnostic-scan-tool-code-reader-4